DPSS 457nm Laser
|
|
 |
|
|
|
Specifications:
|
|
Model
|
|
SDL-457-XXXT
|
|
Output Power
|
|
1-30mW
|
|
Wavelength
|
|
457±1nm
|
|
Operation Mode
|
|
CW, Near TEM00
|
|
Power stability after warm-up
|
|
<1%, <3%, <5% (over 2/4/8 hours)
|
|
Warm-up time
|
|
<10 minutes
|
|
M2 factor
|
|
<2. 0
|
|
Beam Divergence (1/e2, Full Angle)
|
|
< 1.5mrad
|
|
Beam diameter at the aperture
|
|
~3. 0mm
|
|
Beam height from base plate (mm)
|
|
45mm
|
|
Polarization ratio
|
|
>100:1
|
|
Point stability after warm-up
|
|
<0.05mrad
|
| Operating temperature |
|
10-35℃
|
| Dimensions of laser head |
212 × 88 × 74mm
|
| Power supply |
|
SDL-PS-500
|
| Dimensions of power supply |
|
238 x 146 x 94mm
|
| Modulation |
|
TTL Modulation >10KHz or Analog Modulation >2Khz
|
| Expect life time |
10000 hours
|
| Warranty time |
1 year
|
| Note: |
 |
See the Glossary and Technology for information about the terms used |
|
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer tothe technology page for more information about the filter. |
|
Other Sytles and custom designs are available. Contact us to discuss your needs. |
|
|
|
|
|
* Detailed Laser Head and power supply info of each power version will be provided on request.
* 4 or 8 hours Longer operation period output power stability are available on request.
* Better (<3%,<1%) power stability are available on request.
* Other version Laser Head and power supply are available on request.
* Analog Modulation >2KHz or higher as option.
* Up to 30Khz TTL modulation on request.
* High frequency AOM modulation on requested.
* Line output version are available on request.
* Fiber coupled system is available on request.
* Longer warranty on request.
* Other custom-made design is available, please contact us for details.
